barbas Wi-Fi Box / Puck, Инструкция по установке и эксплуатации

Страница: 34 / 40

Note: When you contact your dealer, make sure you have photos available of
the blue stickers on the Wi-Fi Box and the receiver. Also, if applicable and
possible, make screen shots of the error code that shows in the 'Barbas
Bellfires Gas' app or make a screen shot of the screen when the problem
occurred.
Reset of the Wi-Fi Box
Push the reset button on the Wi-Fi Box with e.g. a paperclip.
Press reset
button LED Function
Power ON or
1 second re-
set LED 2 flashes red,
green and blue If no network is set, the AP Mode
1)
activates for 2 hours. If
the network is not set after 2 hours the AP mode goes to
Standby Mode (LED 2 is off).
7 seconds LED 1 flashes every
0.5 second in blue Removes the Wi-Fi settings and activates the AP mode
1)
for
2 hours.
20 seconds LED 1 flashes every
0,05 second in blue Sets the Wi-Fi Box back to factory settings and activates the
AP mode
1)
for 2 hours.
1
Access Point mode: The Wi-Fi Box recognizes a Wi-Fi network and is ready to connect with it.
Troubleshooting
34