barbas Unilux-7 45, Руководство по установке и обслуживанию

Страница: 25 / 52

9. Remove the flue pipe connector.
a) Remove the screws that hold the flue pipe connector.
Figure 13. Flue pipe connector
b) Carefully remove the flue pipe connector. Make sure the white gasket on the flue
pipe connector does not damage.
6.2.2 Install the appliance
1. Connect the stainless steel flexible flue pipe to the chimney adapter. Use a hose
clamp to attach the flexible flue pipe to the chimney adapter.
2. Put the appliance in the correct position in the existing fireplace .
3. Make sure that the appliance is installed horizontally. Use a spirit level.
4. Pull the flexible flue pipe through the opening in the top of the appliance
5. Connect the flexible flue pipe on the flue pipe connector. Use a hose clamp. Make
sure the white gasket is in the correct position on the flue pipe connector.
6. Push the flue pipe connector with the flue pipe into the correct position in the
appliance.
7. Attach the flue pipe connector to the appliance with the 4 screws. Make sure the
white gasket is in the correct position.
8. Put a layer of ceramic wool on the top of the appliance. Refer to chapter
5.1
for
specifications of the ceramic wool.
9. Put all the interior parts in the correct position in the appliance. Refer to chapter
5.1
for instructions.
Installation
Unilux-7 75 25