barbas UNILUX-6 43, Инструкция по установке и руководство по ежегодному обслуживанию

Страница: 24 / 44

24
UNILUX-6 43
Installation instructions
COLOUR DIMENSION (cm) CLEAR OPENING (cm 2 )
Brass or white 13.5 x 13.5 75
(incl. fi tting)
Brass or white 27.0 x 13.5 150
(incl. fi tting)
Convection air fan (white) 43.0 x 22.0 550
Available BARBAS grids (option) for ventilating the chimney:
• During installation of the appliance, a clearance of 3 mm should be maintained on all
sides of the appliance to allow for expansion of the appliance during operation.
• If the appliance is to be placed against a bearing wall or against a wall containing
fl ammable material, an air gap of at least 20 mm should fi rst be created .
Before it a false wall, 100 mm thick, must be built of masonry or aerated concrete .
• If the appliance is not placed against a bearing wall or a wall containing fl ammable
material, no false wall is necessary. Layers of insulation of at least 100-mm thickness
will then be suffi cient (class A1, DIN 4102-compliant). See also section 3.3.
• After four weeks, your appliance will be ready for use .
• Ventilate the chimney, by placing ventilation openings at the top and bottom of the
chimney.
The total ventilation openings should be at least 450 cm 2 at the bottom of the
chimney breast and also at least 450 cm
2
at the top of the chimney breast.
(Total ventilation openings: 900 cm 2 .)
Attention! : Smaller ventilation openings than prescribed here may
cause damage to the chimney breast.
Always maintain the minimum dimensions of the
ventilation openings!
• Close up the front.