barbas UNILUX-3200 L, Руководство по установке

Страница: 26 / 52

26
UNILUX-3 200 L / 200 R / 300
Continuous stoking with the primary air supply open (combustion air
supply slider is right over to the “ + “ position) (air through the grate)
causes a fi ercely white-hot fi re that can damage the grate and other
parts of the fi replace.
Ventilation
When using the fi re, ensure a good supply of fresh air. After all, the combustion
air is taken from the room where the fi re is located. Turn on the fl ue gas fan if the
fl ue is fi tted with one.
Spare parts
Any replacement parts must be new, original parts. Use of non-original/
reconditioned parts will invalidate your warranty.
Modifi cation
Do not make modifi cations to your fi re. Any alteration to your fi re, of whatever
nature, will also invalidate your warranty.
6.4. HEATING ECONOMICALLY
The most environmentally-friendly and economic way of heating with wood is
to have your fi re hot but calm. The ash should appear to glow a soft red-orange
and should not glow like a blacksmith’s fi re. Fires like that burn quickly and
intensely, leaving little time for complete combustion.
Your fi re is at its most economical when:
• Burning with the door closed. This makes the fi re hotter and improves
combustion.
• Using dry and clean wood (as described further in section 8).
• Always ensure even combustion. Stoke with the primary air regulator closed.
To do this, place the air supply slider in the centre position.
• The bed of the fi re should be composed of one material and the fi re must
have easy access to air. Position the blocks of wood (loosely and evenly)
horizontally on the bed of ash, so that they are separate and several
centimetres away from the walls.