barbas CUATRO-3 75, Инструкция по установке и руководство по ежегодному обслуживанию

Страница: 40 / 72

40
CUATRO-3 75
Installation instructions
• Combustion air directly from outside:
The appliance now has a completely closed combustion system, which allows it to
operate independently of the surrounding air in the room where the appliance is
located.
- Appliance
with
substructure air-box:
Use one of the many combustion air supply connections Ø125 mm (external)
of the air-box.
Fit a rigid or fl exible pipe measuring Ø125 mm between this air supply connection
and the “outside air supply opening in the wall/fl oor”.
- Appliance
with
substructure fan box (convection fan):
Use the Ø125 mm (external) combustion air supply connection at the left of right
front side of the fan box.
Fit a rigid or fl exible pipe measuring Ø125 mm between this air supply connection
and the “outside air supply opening in the wall/fl oor”.
3.3.3 Fitting in an existing chimney
• Remove the existing fi re basket or stoking stones and remove the shut-off fl ap. The
chimney must be intact and must not be damaged during fi tting.
The chimney breast opening must be big enough for a gap of 1 - 3 cm to be left all
round the appliance. Clad the chimney breast opening from the inside with a ceramic
wool fi reblanket or similar (see section 3.3).
• Extend the existing chimney so that it ends at the appliance’s smoke outlet. To do
this, use a fl exible, double-walled stainless steel chimney, for example.
• Slide the appliance into the chimney breast opening. Seal the smoke outlet where it
joins the chimney so that no soot can accumulate above the appliance under any
circumstances . See 3.3.4.
• Level off the appliance so that the cover does not catch on the base.
• Fill any gaps around the appliance with a ceramic insulation wool fi reblanket and
position the frame (where supplied)