barbas Cuatro-2 60, Руководство по установке

Страница: 29 / 60

29
CUATRO-2 70 CUATRO-2 60 CUATRO-2 80
1 Handle
2 Ceramic heat-proof glass
3 Locking slider for operating pin of fl ue gas fl ap
4 Operating pin of fl ue gas fl ap
5 Smoke outlet (can be dismounted)
6 Convection air escape opening (permanent)
7 Convection air escape opening (2x)
The use of this is strongly recommended
For connecting convection set (option)
8 Internal panels (vermiculite plate) / Inner lining
9 Bottom (vermiculite plate) / Inner lining
10 Wood rack
11 Combustion air-supply slider (Combined operation for the primary and
secondary combustion air-supply)
12 Inlet opening convection air (2x on the side and 1x at the rear)
For a direct convection air supply possibility
The “break-away openings” should be removed.
Only applicable if the chimney is ventilated!
13 - Inlet opening combustion air from living-room. This automatically
becomes obsolete if the opening at the bottom is used (14)
- Intake opening convection air.
Only applicable is the detachable fl ap on the underneath is removed
and there is at least 1 cm free space (niche) below the appliance.
14 Inlet opening combustion air on underside of appliance. Optional use with
the connection ring supplied. For a direct combustion air supply possibility.