![barbas 90-60 PF2 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/barbas/90-60-pf2/90-60-pf2_preparation-manual_3778765007.webp)
4
Requirements
4.1
Requirements on the location
• Never use combustible building materials for the fireplace.
• Do not install the appliance against a flammable rear wall.
• Install a non-flammable insulation plate of at least 12 mm between the appliance and
a non-flammable rear wall. The insulation plate must cover the entire area of the rear
of the appliance.
• For details about the installation, minimum clearances to flammable materials,
permitted insulation materials and air gaps, refer to the "installation and maintenance
manual".
• If the fire burns in the appliance, make sure that the floor temperatures below and in
front of the appliance cannot be higher than 85 °C .
• Make sure that the room where the appliance is installed is properly ventilated.
4.2
Requirements on the convection package (option)
• The convection outlet opening must be at least 0,5 meter above the appliance.
• No flammable material is present within 10 cm on both sides and 20 cm above the
convection outlet opening.
• The convection outlet opening must be at least 15 cm below the ceiling.
4.3
Other requirements
• The gas supply connection is located near the right side of the appliance for an easy
connection.
• Only use gas piping of at least ½" and a shut-off valve to connect the gas supply to the
gas connection of the appliance.
• Make sure that there is a wall socket with an earth connection nearby the appliance.
The socket must be accessible at all times. The power cable (+/- 0.5 m) is coming
from the right side of the appliance.
• Install the fireplace on a solid floor that can bear the weight of the appliance and the
fireplace.
• If the floor is made of flammable material, take correct safety measures. Install a
temperature protection plate made of nonflammable material between the appliance
and the floor.
• Install the appliance as a built-in appliance in a new fireplace.
• If the concentric flue system is installed in an existing chimney that is used for wood or
coal fire, clean the chimney.
• If you built a new fireplace, make sure that it is ventilated with vents at the bottom and
top of the fireplace. If the fireplace is not ventilated the temperature of the appliance
can increase to dangerous temperatures and damage the fireplace.
• Keep a minimum distance between the appliance and flammable mantelpieces. Refer
to the chapter "Mantelpiece clearances" in the "installation and maintenance manual":
for the correct minimum clearances.
Requirements
Gas Fire Front 90-60
7
Содержание 90-60 PF2
Страница 23: ...5 2 Gas Fire Front 90 60 PF2 with Floating Frame Gas connection Technical specification Gas Fire Front 90 60 23...
Страница 25: ...5 4 Gas Fire Front 90 60 PF2 with Hidden Door Gas connection Technical specification Gas Fire Front 90 60 25...
Страница 26: ...5 5 Gas Fire Front 90 60 PF2 with Hidden Door Gas connection Technical specification 26 Gas Fire Front 90 60...
Страница 96: ...Your Barbas dealer 002 21 07 2022 352518 252 002...