barbas 70-55 PF2, Руководство по установке и обслуживанию

Страница: 49 / 84

9. Do a check for damage on the inside of the appliance, including these parts:
a) Main burners.
b) Pilot burner.
c) Combustion air intake.
d) Overpressure hatches.
e) Flue system. Use a flashlight if necessary.
10. Clean the glass. For standard glass, refer to chapter
6.2.4
. For anti-reflective glass
refer to chapter
6.2.5
.
11. If the black mirror rear wall is installed in the appliance, clean the black mirror. Use
glass spray or ceramic hob cleaner.
12. Install the glass panes. Refer to chapter
6.2.2
.
13. Prepare the appliance for use. Refer to chapter 5.3.4 .
6.1.2 Do a check on the appliance
1. Do a check for leaks on the gas pipes and the gas pipe connections. Refer to chapter
5.2.5
.
2. Make sure that the pilot light operates correctly. The pilot light must not show any
anomalies.
3. Make sure that the main burner operates correctly. The fire must not show any
anomalies.
4. Do a check of the gas supply pressure and the burner pressure.
a) Use the inlet pressure tap and outlet pressure tap on the gas regulator block to
measure the supply pressure and the burner pressure.
b) Measure the pressure when the appliance is off and when the appliance burns
on maximum. Refer to chapter
8
for the required supply pressure and burner
pressure.
5. Make sure that the ambient lighting operates correctly.
6. Do a check on the concentric flue system and the outlet construction. Make sure that
all the connections of the concentric flue system are secure.
6.2 Maintenance procedures
6.2.1 Remove the glass panes
Warning: Before the start of this procedure make sure the appliance is off and
cooled down to room temperature.
Caution: Use protective gloves.
1. Turn off the gas supply to the appliance before removing the glass panes.
Maintenance
Gas Fire Panorama 70-55 49