background image

Grill burner

It is the part used for grilling in gas ranges which is

                       controlled by the gas tap or the

                    gas thermostat under the control knob.

                  It is located at the top of the oven body.

            The holes on the upper part of the burner

 provide the equal burning of gas, thus heat is

distributed uniformly inside the oven.

Oven burner

It is the part that provides the possibility of cooking

          food inside the oven in gas ranges at the

                   desired temperature. It is controlled by

                   the gas tap or the gas thermostat under

the control knob and is located under the oven body

between the oven body and oven bottom support

sheet. The holes on the upper part of the burner provide

the equal burning of gas, thus heat is distributed

uniformly inside the oven.

Top burner

It is the top gas heater. It recieves the gas coming

                  from the main gas pipe to the gas tap

                  with the assistance of the feeding tube.

                     Lighting the gas emitting from the

  burner cap holes on top of the burner head ensures

the food on the top burner plate to be warmed or

cooked.

Thermic element

It is used at the grill burner, oven burner, and even,

     if desired, at the top burners. Its function is to

      prevent the possible gas leakage which occurs

       when the flame is extinguished suddenly. One

        end of the thermic element is connected to the

 releated burner while the other end goes to the gas

tap or thermostat. Once the flame goes out, the thermic

element cuts the gas flow within 60-90 seconds and

prevents the unburned gas to accumulate inside the

oven. While lighting the desired burner, it is necessary

to keep the releated knob pressed for about 10-15

seconds after the flame becomes visible. The purpose

Injector

When the gas tap or the thermostat is turned on with

         the control knob, the injector sprays the gas

        coming to the burner regularly and at a certain

pressure through the burner.

Gas tap

It provides the gas flow to the oven, grill and top

          burners with the assistance of the feeding

           tubes when the releated control knob is

             turned on.

Gas thermostat

        It provides the gas flow to the oven and grill

          burners with the assistance of the feeding

          tubes when the releated control knob is

         turned on. The gas thermostat can be adjusted

to the desired temperature according to the various

types of meals to be cooked. One end of the oven

and grill thermic elements are connected to the gas

thermostat.

Lamp button

        It is an on-off switch which controls the lamp

          and/or the rotisserie motor in gas ranges.

Automatic ignition

            It is a range lighter which automatically lights

        the top burners by means of the spark plugs

     when its button is pressed, eliminating the need

    to light the burner manually.

Spark plug

One of its ends is connected to the automatic ignition

              while the other end is to the releated

             burner. When the oven knob is turned on

           and the automatic ignition is activated with

its button, the spark created on the spark plug ignites

the burner and provides firing. In this case, the burners

are ready for cooking.

Chapter 1/Components

Chapter 1/Components

Содержание BERU 24100 B



























Отзывы: