Barazza 1FEVEVCN, Инструкция по эксплуатации

Страница: 19 / 76

19
EN
Display Description
Blocked
– the descaling symbol flashes on the
display and all the steam related programs will be
blocked.
Filling the water tank
Opening the front panel
•
Press the key for a few seconds.
•
The front panel slightly opens (
≈
15º).
This process is slow.
•
Complete the panel opening manually.
NOTE: The panel can be opened during the
oven operation.
Filling the water tank
All functions require the water tank to be full.
Fill the water tank up to the
“MAX” mark with
cold, fresh drinking water and introduce it into
the slot located behind the front panel
(maximum 0,8L).
NOTE: Do not use sterilized or distilled
water for cooking with the steam oven. The
minerals in the water are essential for the
cooking process to work.
NOTE: When filling the water tank, the top
section of the tank does NOT fully seal.
Overfilling the tank will potentially cause
the tank to leak when moved.
Refilling the water
The contents of the water tank normally
suffice for one cooking session of 50-60
minutes.
If, however, the water tank needs to be
refilled, the Water refill message shows.
Only fill the water tank up to a maximum of 0,5l
to ensure that the water does not overflow
when it is pumped back to the water tank.
RISK OF OVERFLOW.
Emptying the water tank
When the appliance is switched off, the
residual water is pumped back into the water
tank.
WARNING! The water in the tank may be
hot. Danger of burns!
Depending on the temperature setting and
length of the steam cooking functions, this
can take up to 1 hour to complete. Always
wait until the appear on the display
before removing the water tank,
attempting to run a second steam function
or switching off the power to the steam
oven. If interrupted before finishing, the
pumping will reset, which can cause the
internal water pump to run dry and make a
loud vibrating noise while it runs. Over
time, this can cause damage to the pump.