www.baratza.com
rev. 4/16/2019
Lift the safety interlock
switch off its posts.
Remove the 3 screws
securing the gearbox/
motor assembly to the
chassis.
*These screws may be
Phillips, or Torx size 10*
Unplug the motor and
lift the gearbox/motor
assembly from the
chassis.
*If the motor wires are
hard-wired to the circuit
board, mark which
color wire goes to each
terminal to prevent
the burr from spinning
the wrong way after
reassembly. It should
spin clockwise.
Unplug this
Pg. 2
