baracuda tracker, Руководство пользователя

Страница: 8 / 10

page 8
Removing Debris from the Engine
WARNING
To avoid serious injury, make sure that the cleaner is disconnected from the hose
and the pool suction pump is turned off prior to starting this operation.
1. Push the latch release button on the top of the cleaner.
2. Rotate the top lid assembly back until it clicks into an upward position.
3. Look into engine and remove debris that is present.
4. If needed, slowly push engine paddles forward and/or backwards to move stuck debris to an accessible position
then remove it. When moving the engine paddles, make sure the cleaner tracks are allowed to move freely as
they will turn as the engine paddles rotate.
5. Close engine top and ensure the latch clicks in place.
6. Turn cleaner over and check for debris in scrubber and inlet.
Care and Maintenance