bar SmartControl 2.0, Руководство по эксплуатации

Страница: 32 / 40

Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx Page 31 / 39 Date: 31/03/2020
7.3 Selection of the additional functions
7.3.1 Drive In/Drive Out
With the Bär SmartControl 2.0 system, it is possible to drive a drive-under Cargolift in and out. In order to be
able to select the “Drive In” and “Drive Out” functions, the corresponding function mode must first be
activated.
Entry Display Description
P
rerequ
is
it
e
s
or
- Drive-under Cargolift.
- Hand-held transmitter is logged in
- In the last 5 seconds no function was selected
via another control element.
A
cti
va
ti
ng
t
he
fun
cti
on
mode
or
 To activate the “Drive In” and “Drive Out” function
mode:
Press the 4-function pushbutton and hold it for at
least 1 second.
 “Truck” function mode active:
Green LED blinks, red LED under the truck
symbol illuminates and the fifth LED blinks.
 “Trailer” function mode active:
Green LED blinks, red LED under the trailer
symbol illuminates and the fifth LED blinks.
D
ri
ve
ou
t
or

To drive out the Cargolift:
Press the “Open” pushbutton 2 x then hold it
down.

The Cargolift drives out until the pushbutton is
released.
D
ri
ve
i
n
or

To drive in the Cargolift:
Press the “Close” pushbutton 2 x then hold it
down.

The Cargolift drives in until the pushbutton is
released.
D
ea
cti
va
ti
ng
t
he
fun
cti
on
mode
,
,
or
or
The function mode is ended when
-
the “Lift” pushbutton is actuated,
-
the “Lower” pushbutton is actuated,
- the function pushbutton is actuated,
or
- no pushbutton is actuated for longer than 7
seconds.
h > 1s
1x
2x+h
2x+h
1x
1x
1x