BAQ alphaDUR mini Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 50

BAQ alphaDUR mini Скачать руководство пользователя страница 20

MEASURING PARAMETER

6 Measuring parameter

6.1 Description

After switching the

alphaDUR mini

on, the last used combination of

measurement parameter is always active.

The measuring parameter in detail:

Material :

The currently selected material calibration. Materials that

are not valid for the selected revaluation standard (see

chapter 7.1) are displayed in gray. For details about

material calibration see chapter 8.

Hardness scale : The current hardness scale to which, if necessary, the

measured values are converted. Vickers hardness is

always measured. If another hardness scale is selected,

the measuring values are converted. (see chapter 7) In

the measurement window the hardness scale can be

switched with by pressing the key SCALE.

Rating :

These are the upper and lower limits for rating. A signal of

two short beeps appears if a measured value lies outside

these limits. A single beep appears if the value is rated

GOOD.

If both limits are set to 0, no rating will be done.

It is self-evident, that the upper limit must be higher than

the lower limit.

If rating is activated, it will be indicated in the measuring

window when the upper or lower limit is exceeded.

Statistics :

Here the number of measured values which should be

statistically evaluated without the use of the measured

value memory is defined.

Instant printout : If a mobile printer is connected, a consecutive printout can

be here be switched on or off (see 5.6).

20

«
...
18
19
20
21
22
...
»

Содержание alphaDUR mini



















































Отзывы:

Нет отзывов