Remove front wheel;
Remove front shock absorber, front fender
bracket, etc.
Remove steering stem from head tube.
The removing of the bottom bearing cup, bearing
top and bearing set is the same as the removing
of the upper series.
z
Do not damage steering stem when
removing bearing cup and bearing top.
z
Clean opening parts of motorcycle body
covering parts with cloth.
Inspection
Inspect if there is slot or pit in bearing cup and
bearing top. If there is, effect replacement.
Inspect for completeness of bearing balls and if
there is, effect replacement with new ones.
Inspect for proper tightness of steering stem and
if not, effect adjustment and fasten it.
Inspect for correct position of bearing cup and bearing top and if not, effect correct mounting.
front wheel
shock
front fender
bracket
bottom bearing
cup,bearing top
and ball set
head tube
absorber
upper bearing top
ball set
ball set
bottom bearing cup
bottom bearing top
upper bearing cup
Bearing Cup and Bearing Top Replacement
Remove bearing cup and bearing top with special bearing cup and bearing top removers.
Mounting
Apply grease to bearing cup and bearing top at the bottom.
Mount in order bottom bearing cup, bearing ball set, bottom bearing top on the bottom of
steering stem.
Pass steering stem through head tube.
Mount front fender bracket.
Mount front wheel.
Mount front shock absorber and other parts.
23
www.asiamotor.se Baotian European Spare parts Center
