Baoli F 2-3.5T Series, Руководство по эксплуатации и обслуживанию

Страница: 12 / 102

6 6
5.1 Switch (Fig.1.3) 5.1 Switch (Fig.1.3)
No. No. Name Name Operation Operation and and attention attention
1 1 Ignition Ignition switch switch
O (OFF): O (OFF): Engine stop position. Key insertion and Engine stop position. Key insertion and withdraw withdraw
are performed in this position. are performed in this position.
I (ON): I (ON): Engine operation position. Locate one position Engine operation position. Locate one position
clockwise from O (OFF) position. clockwise from O (OFF) position.
The intake heater is preheated before starting the diesel The intake heater is preheated before starting the diesel
forklift.
forklift.
START: START: Engine start position. Locate one position Engine start position. Locate one position
clockwise from the I (ON) clockwise from the I (ON) position. position.
After engine start, After engine start, release the release the key and key and it it will return will return to the to the
I(ON) I(ON) position automatically position automatically..
Caution: Caution:
． ．
Never operate the ignition switch before sitting on the Never operate the ignition switch before sitting on the
seat. seat.
． ．
For the sake of For the sake of safety it is safety it is recommen recommended to always start ded to always start
the engine with the transmission gear shift lever shifted in the engine with the transmission gear shift lever shifted in
the neutral position. the neutral position.
． ．
Do not turn the switch to the START position while the Do not turn the switch to the START position while the
engine is running. engine is running.
． ． Do not leave the switch in the ON position when the Do not leave the switch in the ON position when the
engine is stopped. It may cause over discharge of the engine is stopped. It may cause over discharge of the
battery. battery.
． ．
Do not operate the starter motor for more than 15 Do not operate the starter motor for more than 15
seconds continuously. Return the switch to the OFF seconds continuously. Return the switch to the OFF
position and wait at least 30 seconds prior to attempting position and wait at least 30 seconds prior to attempting
restart. restart.
2 2 Integrated Integrated light light and and turn turn signal signal
switch switch
(1) Left turn (1) Left turn
(2) Right turn (2) Right turn
This switch serves as both two-position light control and This switch serves as both two-position light control and
turn signal switch. turn signal switch.
Light control switch Light control switch
Lamp name Lamp name Step1 Step1 Step2 Step2
Head lamps Head lamps — — ○ ○
Side clearance lamps Side clearance lamps ○ ○ ○ ○
Caution: Caution:
Do not keep lamps such as head lamps kept on for a long Do not keep lamps such as head lamps kept on for a long
time when the engine is stopped. It may cause over time when the engine is stopped. It may cause over
discharge of the battery to make engine starting discharge of the battery to make engine starting
impossible. impossible.
Turn signal switch Turn signal switch
Make the turn signal lamps blink. Make the turn signal lamps blink.
Left turn………………… Left turn………………… ..Push forward ..Push forward
Right turn………………… Right turn………………… Pull backward Pull backward
Caution: Caution:
The signal switch will operate when the ignition switch is The signal switch will operate when the ignition switch is
ON. ON.
https://www.besttruckmanuals.com/