4
Getting Acquainted
A.
State Indicator:
the green light keeps lighting while receiving a selected signal. The red light twinkles
while receiving designated signal. Red light twinkles while the transmitting is to be time out , green
light twinkles while scanning.
B.
Channel selector:
Rotate to select channels. In the different positions, press
PF1
to switch on or off a
variety of functions, and channel group code selection.
C.
PWR/VOL Switch:
Turn clockwise to switch on the transceiver. Turn counterclockwise to switch off
the transceiver. Rotate to adjust the volume level.
D.
PTT (Push-To-Talk) Switch:
Press and hold
PTT
button to call a station, then talk to the microphone
in your normal voice. Release it to receive a call.
E.
Function Button (PF1)
: According to different switch positions of channel number, press this button
to switch on the transceiver to turn on or off a variety of functions, and channel group code selection.
During the state of dual watch, it is
PTT
button of designated channel (Written by PC programming
software)
F.
MONI Button (MONI):
Press and hold this button to monitor circularly the signal from the selected
channel and designated channel,
G
. Speaker /Microphone rubber plug:
Cover the jack while SP & MIC is free.
Power On:
Rotate
PWR/VOL
Switch
clockwise, you will hear a sound
“
Beep
”
,
report the present channel, the transceiver is ready for working
Adjusting Volume:
Press and hold
MONI
button, meanwhile rotate
PWR/VOL
Switch
to adjust the volume
Channel Selection:
Rotate Channel Selector to select your channel or select
a new channel, (Press
PF1
to power on) to turn on or off other functions
PTT Button:
Press and hold
PTT
button to call a station,
then talk to the microphone in your normal voice.
Note:
Keep the Microphone approximately 1.5 inches (3-5cm) from your lips
文件使用
" pdf Fact or y Pr o"
试用版本创建
