Baofeng UV-5RIII Скачать руководство пользователя страница 22

The warranty does not cover any faults caused by accident, improper installation and use, electric shock (eg 
storms), connect a power other than that specified, reverse polarity in the diet, or claims due to deterioration in 
the external appearance of normal use, nor the amount or condition of the accessories. 
Checking the accessories is the responsibility of the purchaser at the time of purchasing the device.

 

The warranty does not cover rechargeable batteries even if they are part of the equipment purchased as they are 
considered consumables, the impairment must be reported within a period of fifteen days from the date of 
purchase.

 

The warranty is void on the following assumptions:

 

1. - Devices that have been manipulated by another or by anyone other than authorized service provider.

 

2. - Equipment and accessories in which the serial number has been altered, deleted or filed unreadable.

 

3. - Use of the product than as intended.

 

To make use of the guarantee is necessary to give the dealer or any of the Authorised Service the defective 
device with its accessories and the following documentation:

 

1. - Warranty Certificate duly completed and sealed.

 

2. - Original invoice which clearly identifies the device and the date of purchase. 
3. - Description of the faults.

 

The warranty terms contained in this Certificate of Guarantee do not exclude, modify or restrict the statutory 
rights of the buyer by virtue of the laws in force at the time of purchase, but are added to them.

 

 

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 
 

 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party responsible for compliance  

could void the user's authority to operate the equipment.   This device complies with Part 

15 of the FCC Rules.  Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 
 

 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party responsible for compliance  

could void the user's authority to operate the equipment.   This device complies with Part 

15 of the FCC Rules.  Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 
 

 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party responsible for compliance  

could void the user's authority to operate the equipment.   This device complies with Part 

15 of the FCC Rules.  Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

 SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW.

WARNING:

 MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE 

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 
 

 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party responsible for compliance  

could void the user's authority to operate the equipment.   This device complies with Part 

15 of the FCC Rules.  Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

 SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW.

WARNING:

 MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE 

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 
 

 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party responsible for compliance  

could void the user's authority to operate the equipment.   This device complies with Part 

15 of the FCC Rules.  Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

 SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW.

WARNING:

 MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE 

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Содержание UV-5RIII























Отзывы: