Baofeng UV-2501, Руководство пользователя

Страница: 23 / 36

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 17
codes.
The numerical keys, as well as the
, and , keys correspond to the matching DTMF codes as
you would expect. The A, B, C and D codes are located in the , , and keys
respectively (†).
To send DTMF codes, press the key(s) corresponding to the message you want to send while
holding down the PTT key.
Inspect function
When the receive DTMF code is the same as the setting inspect code, the receiver will send an
ID code. The screen can display this code. This function’s settings are controlled by the master
ID, and not the receiving station. (inspect code is set by PC software)
Monitor function
When receive DTMF signal is the same as the setting code, receiver will turn on the monitor
f unction f or nearby signal. This function’s settings are controlled by the master ID, and not the
receiving station. (monitor code is set by PC software)
Remote stun
When receive DTMF signal is same as pre-set remote stun code, the receiver will turn off