Baofeng UV-17R Series, Руководство пользователя

Страница: 24 / 41

21
• Time operation
In Time Operation (TO) mode, the scanner stops when it detects a signal, and after a factory preset time out, it resumes
scanning.
• Carrier operation
In Carrier Operation (CO) mode, the scanner stops when it detects a signal, and after a factory preset time with no signal it
resumes scanning.
• Search operation
In Search Operation (SE) mode, the scanner stops when it detects a signal.
To resume scanning you must press and hold the
key again.
6.2.2 Frequency scanning
This function can scan the frequency.
a. In frequency mode, press key for more than 2 seconds. The radio will start scanning the frequency according to the
set frequency step.
b. You can change the scanning direction with the

/

keys.
c. Press key to stop the scanning.
Note: for Scan mode, see Menu No.21.
6.2.3 Channel scanning
This function can scan the channels.
a. In channels mode, press key for more than 2 seconds. The radio will start scanning according to the channel you set.
b. You can change the scanning direction with the

/

keys.
c. Press key to stop scanning.
Note: for Scan mode, see Menu No.21.
6.2.4 Scan CTCSS
The function allows scanning the frequencies with CTCSS tone enabled.
a. In standby mode, press
[1][4] , “ Scan CTCSS ” will appear on the display.