UV-5R Manual
Page 7
40
RESET
Restore defaults
0 – 1
1, All
Key
Value
Notes
0
VFO
VFO settings only
1
ALL
Total reset*
An example set up for a repeater:
Key in 145115 the NCARC #1 2 Meter repeater
<MENU>25<MENU>2<MENU><EXIT>. Tto set – DUP offset
<MENU>26<MENU>00.600<MENU><EXIT>. To set / verify offset frequency
MENU>13MENU>13<MENU>EXIT>. Set CTCSS transmiter encoder tone
This should allow the use of the 145115 repeater.
Now to store the VFO (Frequency) mode settings into memory
<MENU>28<MENU>1<MENU><EXIT>. To clear memory #1
<MENU>27<MENU>1<MENU><EXIT>. To set VFO settings into memory #1
You wouldn't have to program very many channels manually and you will find it tedious. I used the multi platform program CHIRP to enter data into radio
MEMORY any or all 125 memory chanels.
