Baofeng Pofung 10RX Series Скачать руководство пользователя

Страница: 7 / 45

Keep the product at least 2.5 centimeters away from your body during transmission.

Do not keep the product receiving at high volume for a long time.

For vehicles with an air bag, do not place the product in the area over the air bag or in the air bag deployment area.

Keep the product and its accessories out of reach of children and pets.

Please operate the product within the specified temperature range.

Continuous transmission for a long time may lead to heat accumulation within the product. In this case, please keep it at

a proper location for cooling.

Handle the product with care.

Do not disassemble, modify or repair the product and its accessories without authorization.

■

Precautions for Batteries

Charging Prohibitions

To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions:
1.

Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres and other

flammable or explosive materials.

Do not charge your battery that is wet. Please dry it with a soft and clean cloth prior to charge.

Do not charge your battery suffering deformation, leakage and overheat.

Do not charge your battery with an unauthorized charger.

Do not charge your battery in a location where strong radiation is present.

Overcharge shall always be prohibited for it may shorten the life of your battery.

Maintenance Instructions

To help your battery work normally or prolong its life, be sure to observe the following instructions:
1.

Accumulated dust on charging connector may affect normal charging. Please use a clean and dry cloth to wipe it on a

regular basis.

It is recommended to charge the battery under 5

℃

~40

℃

. Violation of the said limit may cause battery life reduction or

Содержание Pofung 10RX Series














































Результаты поиска

Содержание Pofung 10RX Series

Отзывы:

Похожие инструкции для Pofung 10RX Series

Бренды по названию

Популярные бренды

Baofeng Pofung 10RX Series, Руководство пользователя

Результаты поиска

Содержание Pofung 10RX Series

Отзывы:

Похожие инструкции для Pofung 10RX Series

Бренды по названию

Популярные бренды