Using a Headset
You can use a headset (#480_5R) for more private communications. To use a headset, lift the rubber cover from over the
headset jack, and then plug in the headset.
Important:
Your radio is not submersible or waterproof when using a headset jack. When you remove the headset, be sure
to fully press the jack cover into place to restore its waterproof capability.
Charging the Battery
Charging the Radio
Two radios can be charged directly by using the supplied charging cradle. A single radio can charge using the Type-C USB port
to connect to a USB power source. For fastest charging, turn off the radio before charging.
Warning!
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the accessories specifically
designated for this product. Using the Type-C USB Port
1) Connect the included AC adapter with Type-C USB connector cable to the radio's Type-C USB port. Connect the other end
to an outlet that provides USB charging power (NOT to a USB hub).
2) Charge the batteries for 6 hours until the battery indicator either stops flashing.
Using the Charging Cradle
1) Connect the included AC adapter with USB connector cable to the charging cradle's Type-C USB port. Connect the other
end to a standard AC wall outlet.
2) Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.
3) Charge the batteries for 6 hours.
Note:
• Use only the supplied batteries, charger, and AC adapter or approved accessories.
• Charge time may vary depending on the battery life remaining.
• The batteries must be installed for the unit to operate, even if the unit is also connected to external power.
