Baofeng G11S, Руководство пользователя

Страница: 17 / 33

14
seconds when the channel is no longer active.
When you press the [PTT] key to transmit on an active channel, the scanning function will stop and remain on the active
channel for 5 seconds before resuming scan when
[PTT]
key is no longer pressed.
To resume scanning, quickly press the key.
5.6 Monitor
Press and hold the
[MONI]
key for around 2 second will let you hear noise so you can adjust the volume level of the radio
when not receiving a signal. This should be used to check activity on your current channel before transmitting.
Press and hold the [MONI] key for 3 second again to get out of Monitor mode.
5.7 Keypad lock
This function locks the keypad to prevent accidental pressure of the controls.
To avoid accidentally changing the radio setting, press the
[A/B ]
key for 2 seconds. The icon will appear on the display.
PTT
,
LAMP
,
MONITOR
, and
FM Radio
keys will still be active. Repeat the same procedure to unlock the keypad.
5.8 A/B switch
Press the
[A/B ]
switch to select the master frequency.
5.9 Flashlight and Emergency Alert
This function is very useful for night illumination.
To turn it on press
[LAMP]
; push it again, the flash light will be strobe; push it again: it will turn off.
Open radio, press and hold the
[LAMP]
key for about 2 seconds to activate the sound and light alarm function. Press
[LAMP]
key again to exit the alarm state.
5.10 FM Radio (FM)
The frequency range to listen to the radio is 78-108MHz.
With G11S turned on, Press
[FM]
to turn on the radio. Select the desired radio frequency with the
[+UP]/[-DOWN]
keys. Press
[FM]
to exit FM radio.
Note: while you are listening to the radio, the channel of A / B receiving signal will automatically