Picture 18: Scan List
Scan Alias
Name given to group of scanned channels
Available
Will list the channels available to scan
Members
List of channels to be scanned
Designated TX channel
This feature defines the conventional channel/trunking personality on which the radio will
transmit if the user presses the Push-to-Talk (PTT) button while the radio is scanning.
Priority Channel 1
Sets which channel is priority 1
Priority Channel 2
Sets which channel is priority 2
Hang Time
Sets the amount of time that the radio waits on an analog scan list channel when a carrier signal
of sufficient amplitude is detected on the channel. This pause allows the radio to decode the
analog system signaling data. If the decoded information is incorrect, the radio reverts to scan.
Priority Sweep Time
Sets the duration that the radio waits, when in a call, before scanning the priority channels. If
the call is taking place on a Priority 1 Channel, no scanning will take place. When scanning
priority channels, the radio briefly mutes the current transmission. Increasing this interval
improves the audio quality of the current transmission as fewer checks are done, but this also
increases the chance of the radio missing out priority channel activity.
Talkback
Determine if the user can transmit on the channel on which it sounds during the scan.
Note
:
You can add the same channel to multiple scan lists.
Содержание DM-V1
Страница 1: ...BAOFENG DM V1 Programming Guide ...