Strictly filter the useless calls or background noise
Normally filter the useless calls or background noise
Low power transmission
High power transmission
ON; the function works only when “Allow offline” of current
channel of the Software is ticked
OFF
Transmit when the channel is occupied
Press PTT to prohibit transmission when there is carrier
wave
Match sub-audio / color code forbidden
Off, no transmission limit
Alarm in 10 seconds before transmission, and prohibit
transmission when the time is up; for example, when it is
set to 60 seconds, alarm is sent for 10 seconds from
the50th second, and transmission is prohibited at the 60th
second
Strict
Normal
Low
High
On
Off
Off
Carry
QT/CC
OFF
15
～
495S
1.Squelch
2.TX Power
3.Talk
around
4.Busy lock
5.Transmit
time-out
timer
（
TOT
）
69
70
Setting
options
Options
and Range
Description of operation
2.Press the [MENU] button to enter into the MENU mode;
3.Press the [ ]/ [ ] button to scan, then press the [MENU] button to
select;
4. If the scan was stopped, the screen will indicate to open, or if the scan
is activated, the screen will indicate to close.
5.Use the [MENU] button to select.
6. When the scan is activated, the red LED indicator light flash, and the
scan icon will appear in the screen;
Or when the scan is stopped, the LED light will be off and no scan icon is
displayed.
Scan Reply
During scan, the radio will stop at the channel/group calls when the radio
detect activity channel/group calls,
This is called as the pre-programmed time limit for the “Scan suspend
time”
Progress:
1. Hold the radio in a vertical position and keep it 1-2 inches (2.5-5.0cm)
from your mouth. If the function of “Free channel beep” enabled. you will
hear a short beep sound when release the [PTT] button, this indicates
the channel is free and wait for your reply.
2.Press the [PTT] button during the suspend time. The LED light is red.
3.Release the [PTT] button to receive.
4.If you don’ t response during the suspend time, the radio will go on
scanning.
Menu setting
Radio setting
You can make the following settings according to your own preferences
and actual needs, so as to maximize their performance.
The setting method: Enter into the menu “Setting ->Radio setting” ,
select the corresponding setting to set. The press [MENU] to enter the
radio Settings.
The setting items are as below list:
