9
codes
KB Send ANI DTMFST
: All
DTMF Side Tones are heard
Save mode
OFF/1:1/1:2/1:3/1:4
Selects the ratio of sleep cycles to
awake cycles. The higher number
the longer the battery lasts. When
enabled, a word or two might be
missed when the frequency being
monitored becomes active.
Scan mode
TO:
Time Operation - scanning will
resume after a fixed time has passed
Scanning Resume Method
CO:
Carrier
Operation
-Scanning
Resume Method scanning will resume
after the signal disappears
SE:
Search Operation scanning will not
resume
PTT_ID
OFF
: No ID is sent
When to Send PTT-ID; Codes are
sent during either the beginning or
end of a transmission.
BOT
: The selected S-CODE is sent at
the beginning
EOT
: The selected S-CODE is sent at the
ending
BOTH
: The selected SCODE is sent at
the beginning and ending
PTT Delay
0-30ms
Signal code sending delay
KB_LOCK
If you select this option, the
keyboard is locked.
AutoLock (automatic
keypad lock)
When ON, the keypad will be
locked if not used in 8 seconds.
Pressing the [#╓O] key for 2
seconds will unlock the keypad.
BCL (busy channel
Lock-out)
Check
: If the channel is occupied,
when you press the [PTT] key on
this channel, the radio will make a
beep tone and will not transmit any
signal.
Uncheck
: No matter if the channel
is occupied, the radio will transmit
the signal when you press the [PTT]
key.
Beep (keypad beep)
Allows audible confirmation of a
key press
