VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
59
Chapter 12. - Application Specific Setup
Commercial Radio Setup
PLMR users in the United States are mandated to move to 12.5 kHz narrowband
communication in the 150-174 MHz VHF and 421-512MHz UHF bands by January 1, 2013.
Follow these instructions to set your radio to Narrowband mode:
This section is only true for VFO mode.
WN is settable on a per channel basis and has to be set prior to storing a channel.
Once a channel has been programmed, the channel must be deleted and reprogrammed
to change the WN setting.
1.
Press the
key to enter frequency mode.
2.
Press the
key to enter the menu.
3.
Enter
on the numerical keypad.
4.
Press
to select.
5.
Use the
and
keys to select between Wide and Narrow ("Narr").
6.
Press
to confirm and save
7.
Press
to exit the menu.
