Bante210 Benchtop pH Meter
9
Temperature Compensation
In order to get accurate measuring results, you need to enable the manual or automatic temperature compensation before measurement or calibration.
AUTOMATIC TEMPERATURE COMPENSATION:
Insert the connector of temperature probe into corresponding “ATC” socket, the display immediately shows “ATC” indicator. The meter is now switched to
automatic temperature compensation mode.
MANUAL TEMPERATURE COMPENSATION:
1.
DO NOT connect the temperature probe to meter. Press
o
C key to enter the temperature setting mode.
2.
Press
or
key to set temperature value.
3.
Press ENTER key to confirm. Setting is completed.
In the temperature setting mode, press
or
key once, the setting value will increase or decrease by 0.1. Press and hold the
or
key, the
setting value will increase or decrease by 1.
Measure
pH
o
C
ATC
Press MEAS key to freeze or release the measured value
ATC