Bantam e-STATION 902 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 20

Bantam e-STATION 902 Скачать руководство пользователя страница 20

Specifications

Operating voltage range : 11 ~ 18 Volt
Current drain in no-load condition : approx. 100mA
Charge/discharge power : max. 200W
Charge current range : 0.1 ~ 9.9A
Discharge current range : 0.1 ~ 9.9A
Number of cycling charge/discharge : 1 ~ 5 times
Battery data storage : Up to 10 data
NiCd/NiMH battery cell count : 1 ~ 32 cell
Lithium battery cell count : 1 ~ 12 Series
Pb battery voltage : 2 ~ 40V
Weight : 1050 g
Dimensions : 160 X 148 X 60 mm

Warranty and service

- 20 -

Electrical equipment marked with
the cancelled waste bin symbol
must not be discarded in the
standard household waste; instead it should
be taken to a suitable specialist disposal
system.

BANTAM Inc.

#623 Unitech Ville 1141-2
BAEKSEOKDONG ILSANDONGGU
GOYANGSI KYUNGGIDO
KOREA 410-722
Phone: +82 31 904 3939, Fax: +82 31 901 6439
E-mail: [email protected]
Web: www.bantamtek.com

We warrant this product for a period of one year (12 months) from the date of purchase. The
guarantee applies only to such material or operational defects, which are present at the time of
purchasing the product. During that period, we will repair or replace without service charge any
product deemed defective due to those causes. Any repairs carried out under warranty do not
extend the original warranty period. You will be required to present proof of purchase (invoice or
receipt). The defective unit has to be sent to us by pre-paid delivery; we will pay for return shipping
cost. This warranty does not cover the damage due to wear, overloading, incompetent handling or
using of incorrect accessories.

Date of purchase/delivery :

Dealer :

«
...
18
19
20

Содержание e-STATION 902





















Отзывы:

Нет отзывов