Page 7 of 24
Be sure the winch components are clean and dry before operation.
Inspect the tool for wear or damage. Pay special attention to any wear or damage to the wire rope.
Carefully inspect the hoist before operating.
Do not grease or oil the rack, pinion, or the gear.
The top rack must be in low position while changing the feet position.
Do not use the hoist as a working platform. Use a stepladder or a working platform to screw the
board onto the ceiling.
Do not obstruct the wheels while operating. It may cause the device to malfunction.
Do not put your hand through the steering wheel while the top rack is lowering. It may cause hand
or finger injuries.
Do not remove the hoist’s safety labels.
Do not modify the hoist.
Use the hoist on a firm and stable surface which can support the weight of the tool and
plasterboard.
Lock the 2-wheel brakes while lifting a board.
In order to avoid collision with the top rack during its descent, use the main brake to regulate the
speed. In case of a main brake default, release immediately the safety brake lever in order to stop
the descent right away.
Main Parts of Panel Lifter
Reference
Subassembly
1
Arm
2
Arm pipe
3
Top rack
4
Main body
1
2
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
11
12
13
14
15