Page 11 of 19
5. Push the Control Lever (10) down to the "Lift" position. If the fork frame elevates when you
pump the pallet jack, go back and check steps 1 to 3 until the pallet jack can work well in all
three control positions. If the fork frame does not elevate, turn the Socket Head Cap Screw
(33) COUNTER-CLOCKWISE again until the fork frame elevates. Repeat steps 1 through 3
until the pallet jack works in all three control positions.
Figure 6
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
Daily inspection and maintenance of the pallet jack is required,
especially for the wheels and the axles. Remove the thread or
rags on the wheel or axle if any are detected. Unload and
lower the forks to the lowest position after every job is finished.