Method
Action
Result
Remote
Input
Pulse remote input wire > 1 cycle of
operation.
T
> 1 cycle
3.5 Two-Point Static Opposed and Retroreflective
Two-point TEACH for Opposed and Retroreflective modes sets a single switching level. The sensor sets the switching level
between the blocked and unblocked conditions.
1. Align the sensor.
Method
Action
Result
Push Button
Align the emitter/receiver or sensor/
retroreflector. The beam path should not be
blocked.
N/A
Remote
Input
2. Start TEACH mode.
Method
Action
Result
Push Button Press and hold push button > 3 seconds.
> 3 s
BOTH LEDs FLASHING
ALTERNATING
Remote
Input
Pulse remote input wire > 3 seconds.
T
> 3 s
3. Present the target.
Method
Action
Result
Push Button
Present the target. The beam path should be
blocked by the target.
BOTH LEDs FLASHING
ALTERNATING
Remote
Input
4. Configure the sensor.
VS8 Sensor Series
www.bannerengineering.com - Tel: +1.763.544.3164
9