SureCross Performance Node
Configurable Node with up to 12 sourcing discrete inputs or outputs
The SureCross
®
wireless system is a radio frequency network with integrated I/O that can
operate in most environments and eliminate the need for wiring runs. Wireless networks are
formed around a Gateway, which acts as the wireless network master device, and one or
more Nodes.
• Wireless industrial I/O device with up to 12 sourcing discrete inputs or outputs. Default
configuration is set to 6 inputs and 6 outputs (without bit-packing).
• Selectable transmit power levels of 250 mW or 1 Watt for 900 MHz models and 65 mW
for 2.4 GHz models
• 10 to 30V dc power input
• DIP switches for user configuration
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple
Access (TDMA) control architecture ensure reliable data delivery within the unlicensed
Industrial, Scientific, and Medical (ISM) band
For additional information, updated docu-
mentation, and accessories, refer to Ban-
ner Engineering's website,
engineering.com/surecross
.
• Transceivers provide bidirectional communication between the Gateway and Node, in-
cluding fully acknowledged data transmission
• Lost RF links are detected and relevant outputs set to user-defined conditions
Models
Frequency
I/O
DX80N2X6S-P8-KR
2.4 GHz ISM Band
Discrete I/O: Up to 12 PNP inputs or up to 12 PNP outputs (for a total of 12 I/O)
(Default configuration is 6 IN and 6 OUT, without bit-packing)
DX80...C (IP20; NEMA 1) models are also available. To order this model with an IP20 housing, add a C to the end of the
model number: DX80N9X6S-P8C.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
CAUTION: Never Operate 1 Watt Radios Without Antennas
To avoid damaging the radio circuitry, never power up SureCross Performance or SureCross MultiHop (1
Watt) radios without an antenna.
SureCross User Configuration Tool
The User Configuration Tool (UCT) offers an easy way to link I/O points in your wire-
less network, view I/O register values graphically, and set system communication pa-
rameters when a host system is not part of the wireless network.
The UCT requires a special USB to RS-485 (model number BWA-UCT-900 for 1 Watt
radios, BWA-HW-006 can be used for all other radios) converter cable to pass infor-
mation between your computer and the Gateway. Download the most recent revi-
sions of the UCT software from Banner Engineering's website:
gineering.com/wireless
.
P/N 158215-KR
Rev. C
10/2013
