5. Properly dispose of used batteries according to local regulations by taking it to a hazardous waste collection site, an e-waste disposal
center, or other facility qualified to accept lithium batteries.
CAUTION: There is a risk of explosion if the battery is replaced incorrectly.
As with all batteries, these are a fire, explosion, and severe burn hazard. Do not burn or expose them to high
temperatures. Do not recharge, crush, disassemble, or expose the contents to water.
For non-hazardous locations, the replacement battery is model BWA-BATT-011. For non-hazardous or hazardous
locations, the replacement battery is Xeno model XL-205F, Banner model BWA-BATT-001. For pricing and
availability, contact Banner Engineering.
Modbus Register Configuration
Change the factory default settings for the inputs, outputs, and device operations using the device Modbus registers. To change parameters, set the
data radio network to Modbus mode and assign the data radio a valid Modbus slave ID.
Generic input or output parameters are grouped together based on the device input or output number: input 1, input 2, output 1 etc. Operation type
specific parameters (discrete, counter, analog 4 to 20 mA) are grouped together based on the I/O type number: analog 1, analog 2, counter 1, etc.
Not all inputs or outputs may be available for all models. To determine which specific I/O is available on your model, refer to the Modbus Input/
Output Register Maps listed in the device's datasheet. For more information about registers, refer to the MultiHop Product Manual (p/n
).
Specifications
MultiHop Radio Specifications
Radio Range
1
900 MHz, 1 Watt: Up to 9.6 km (6 miles)
2.4 GHz, 65 mW: Up to 3.2 km (2 miles)
Antenna Minimum Separation Distance
900 MHz, 150 mW and 250 mW: 2 m (6 ft)
900 MHz, 1 Watt: 4.57 m (15 ft)
2.4 GHz, 65 mW: 0.3 m (1 ft)
Radio Transmit Power
900 MHz, 1 Watt: 30 dBm (1 W) conducted (up to 36 dBm EIRP)
2.4 GHz, 65 mW: 18 dBm (65 mW) conducted, less than or equal to 20 dBm (100 mW)
EIRP
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
900 MHz Compliance (1 Watt)
FCC ID UE3RM1809: FCC Part 15, Subpart C, 15.247
IC: 7044A-RM1809
IFT: RCPBARM13-2283
2.4 GHz Compliance (MultiHop)
FCC ID UE300DX80-2400: FCC Part 15, Subpart C, 15.247
Radio Equipment Directive (RED) 2014/53/EU
IC: 7044A-DX8024
Antenna Connection
Ext. Reverse Polarity SMA, 50 Ohms
Max Tightening Torque: 0.45 N·m (4 lbf·in)
Radio Packet Size (MultiHop)
900 MHz: 175 bytes (85 Modbus registers)
2.4 GHz: 75 bytes (37 Modbus registers)
M-H6 and M-H6D Specifications
Supply Voltage
Integrated battery models: 3.6 V DC low power option from an internal battery
2
Non-battery models: 10 V DC to 30 V DC (Outside the USA: 12 V DC to 24 V DC,
± 10%)
Interface
Two bi-color LED indicators
Two buttons
Six character LCD
Wiring Access
Integrated battery models: One 5-pin threaded M12/Euro-style female quick
disconnect
Non-battery models: One 5-pin threaded M12/Euro-style female quick disconnect and
One 5-pin threaded M12/Euro-style male quick disconnect
Housing
Polycarbonate housing and rotary dial cover; polyester labels; EDPM rubber cover
gasket; nitrile rubber, non-sulphur cured button covers
Weight: 0.26 kg (0.57 lbs)
Mounting: #10 or M5 (SS M5 hardware included)
Max. Tightening Torque: 0.56 N·m (5 lbf·in)
Certifications
(CE approval only applies
to 2.4 GHz models)
(NOM approval only
applies to 900 MHz
models)
CSA: Class I Division 2 Groups ABCD, Class I Zone 2 AEx/Ex nA II T4 — Certificate:
1921239
ATEX: II 3 G Ex nA IIC T4 Gc (Group IIC Zone 2) — Certificate LCIE 10 ATEX 1012 X
Refer to the Class I Division 2/Zone 2 control drawings (p/n
specifications and limitations. Install the device in a suitable enclosure with provision
for connection of Division 2 / Zone 2 wiring methods in accordance with local codes,
as acceptable to the local inspection authority having jurisdiction. All battery-powered
devices must only use the lithium battery manufactured by Xeno, model XL-205F
(Banner model number BWA-BATT-001).
1
Radio range is with the 2 dB antenna that ships with the product. High-gain antennas are available, but the range depends on the environment and line of sight. Always verify your wireless network's range by performing
a Site Survey.
2
For European applications, power this device from a Limited Power Source as defined in EN 60950-1.
Sure Cross
®
MultiHop H6 Data Radio
P/N 152725 Rev. J
www.bannerengineering.com - Tel: + 1 888 373 6767
5