background image

 

Create a New Gateway

After you log into the Banner Cloud Data Services website, the 

Gateway

 screen displays. Follow these steps to create a new

monitoring site.

1. Click on 

+New Gateway

.

Create a new Gateway/site for each device that will be sending data to the web server.
 

 

Create New Gateway

 prompt appears.

2. Verify 

Traditional

 is selected for the 

Configuration

.

3. Enter a site name.
4. Click 

Create

.

The Gateway/Site appears in the listing of devices on the Gateways screen.

5. Click 

Edit Gateway

 (pencil icon) next to your Gateway/Site name.

The Gateway detail window appears.

6. Copy the 

Site ID

 number located at the top of this window.

The Site ID number created by the web server is a required parameter in the configuration of the DXM. The Site ID is the

address the webserver uses to store the data pushed from the DXM.

7. Click 

Save

.

Connect to the Software and Download the Existing 

Configuration

Follow these steps to connect your DXM to the configuration software and download the existing configuration file from your DXM to

your hard drive.

1. On the computer, download the 

DXM Configuration Software v4

 from the Banner Engineering website and install it.

2. On the DXM: Apply power to the DXM.
3. Connect the DXM Controller to the computer with a USB cable or skip if the DXM is connected to the same network as the

computer.

4. On the computer: Launch the DXM Configuration Software.
5. From the 

DXM Model

 drop-down list, select DXM700.

6. On the menu bar, go to 

Device

 > 

Connection Settings

.

• If you are using the USB cable, select 

Serial

, then select the COM port that the USB cable is plugged into. Click

Connect

. If you are unsure which COM port and multiple appear, attempt to connect to each one of them until

successful.

• If you are connected to the same network as the DXM, select 

TCP/IP

 and enter the DXM IP address. Click 

Connect

.

7. After the DXM is connected to the software, click 

Device

 > 

Get XML configuration from DXM

 to download the current XML

file.

8. Name and save the file to the computer.

Vibration Monitoring and Predictive Maintenance Solutions Kit Quick Start Guide (MultiHop)

 

 

P/N 214301 Rev. F

www.bannerengineering.com - Tel: + 1 888 373 6767

11

Содержание SolutionsKit2-Vibe-MH
















Отзывы: