Pin Number: Description
Name
Values
Host Mirroring Output Type
•
Open Collector
•
Push/Pull
IO-Link
®
IO-Link
®
is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize
sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit
For the latest IODD files, please refer to the Banner Engineering Corp website at:
.
Mechanical Installation
Install the R95C 8-Port Hub to allow access for functional checks, maintenance, and service or replacement. Do not install the R95C 8-Port Hub in
such a way to allow for intentional defeat.
All mounting hardware is supplied by the user. Fasteners must be of sufficient strength to guard against breakage. Use of permanent fasteners or
locking hardware is recommended to prevent the loosening or displacement of the device. The mounting hole (4.5 mm) in the R95C 8-Port Hub
accepts M4 (#8) hardware. See the figure below to help in determining the minimum screw length.
17.0 mm
MOUNTING SCREW
CAUTION: Do not overtighten the R95C 8-Port Hub's mounting screw during installation. Overtightening can affect the
performance of the R95C 8-Port Hub.
Wiring
Port 1-Port 8 — Female
Pin
Signal Description
2
3
4
1
1
18 V DC to 30 V DC
2
Discrete 2 (IN/OUT)
3
Ground
4
Discrete 1 (IN)
Male
Pin
Signal Description
1
4
3
2
1
18 V DC to 30 V DC
2
Banner-specific
3
Ground
4
IO-Link
Status Indicators
The R95C 8-Port Discrete Bimodal to IO-Link Hub has matching amber LED indicators on both sides for each discrete device port to allow for
installation needs and still provide adequate indication visibility. There is also an additional amber LED indicator on both sides of the converter,
which is specific to the IO-Link communication.
1
5
2
6
3
7
4
8
Device LEDs
(x8)
Com LED
(x1 near M12 male)
Power LED
(x1 near M12 male)
R95C 8-Port Discrete Bimodal to IO-Link Hub
P/N 227446 Rev. A
www.bannerengineering.com - Tel: + 1 888 373 6767
3
