4
© Banner Engineering Corp. www.bannerengineering.com
LTF T
IME
OF
F
LIGHT
L
ASER
D
ISTANCE
S
ENSOR
Q
UICK
S
TART
G
UIDE
B
ANNER
E
NGINEERING
C
ORP
.
Quick Menu
The sensor includes a Quick Menu with easy access to view and change the analog and discrete output switch points. Access the Quick Menu
by pressing
Down
or
Up
from Run mode. When in the Quick Menu, the current distance measurement displays on the first line and the menu
name and the analog value alternate on the second line of the display. Press
Enter
to access the switch points. Press
Down
and
Up
to change
each digit. Press
Enter
to move right one digit. After reviewing each digit, press
Enter
again to save the new value and return to the Quick Menu.
Press
Cancel
to ignore any changes made if only some digits have been changed.
Figure 7:
Quick Menu Map (Window Mode)
LTF Sensor Menu (MENU)
Access the Sensor Menu by pressing
Enter
from Run mode. The Sensor Menu is also accessible from the Quick Menu: navigate to
MENU
and
press
Enter
. The Sensor Menu includes several submenus that provide access to view and change sensor settings and to view sensor informa
-
tion.
Figure 6:
Accessing the menus
See
from Run Mode
Access
Quick Menu
Access
Sensor Menu
Quick Menu
4mA Pt (value)
MENU
20mA Pt (value)
SPt1 Pt (value)
SPt2 Pt (value)
access Sensor
Menu (Top Menu)
Run
Mode
set value with
or
Save setting
and return to
Quick Menu
Cancel and
return to
Quick Menu
* In Setpoint Mode,
SPt1 Pt is replaced by SPt
and SPt2 Pt is not available.
