background image

 

17 

CAUTION! 

The Heat Shoes are hot! Please use caution when cleaning the rollers or Heat 

Shoes or when removing wrap-arounds. Be careful with sharp objects, cutting a rubber roller 
will ruin it and result in void of warranty. 

 
 
Warranty & Return Policy...

 

 

 
Warranty:

 

Your laminator is warranted to be free of defects in material and workmanship for a period of 1 year 
from the date of original purchase. In the event of a manufacturers defect in materials or workmanship 
or for assistance with the operation of a malfunction, please email [email protected]. Include 
the model number, serial number, dealer purchased from and the date of purchase. Also please attach 
pictures of the problem and explain in detail the issues you are having and a technician will get back to 
you within 24 hours.  
 
Laminators Specialties, Inc. makes no other warranty stated or implied except as stated above. This 
warranty does not cover damage to the machine that occurs as a result of misuse, wrap-around or 
improper handling, or damage to prints. If you receive your machine with shipping damage please 
contact your dealer right away. All freight charges to ship machine back are your responsibility
 

Return Policy:

 

If your laminator is not operating properly, first review the Operating Instructions and the 
troubleshooting guide. If the malfunction cannot be corrected, contact your dealer for instructions. Be 
sure to have your machine serial number and date of purchase handy. 
 
If the laminator must be returned to the dealer, There will be a 20% restock fee and it is your 
responsibility to ensure that it is shipped back in original packaging. Failure to do this will void all 
warranties. If you do not have the original packaging. please contact your dealer for purchase at an 
additional charge. All freight charges to ship machine back are your responsibility. Shipping 
damage as a result of improper packaging is not covered under the terms of this warranty. 

 

 

 

 

 

 

Содержание Easy-Lam II




















Отзывы: