1.1.
Mark the edge of your door at the desired height
of your escutcheon. This will generally be 85mm CTC
(Centre to Centre) from the centre of the spindle
hole of the door lever to the centre of the key hole.*
(Figure 1)
Preferred
product
height
Figure 1.
1. Marking the Door
Figure 2.
1.2.
Using a spirit level,
mark the door at the
desired height,
continuing the line
from the front of the
door, around the edge
and onto the back of
the door. (Figure 2)
1.3.
We recommend
extending the line
100mm onto each
face of the door.
—
*Please refer to the template included with your mortice lock
(also available for download from our website).
Figure 3.
As per supplier instructions.
2. Install Mortice Lock
3.1.
Insert key / key euro cylinder through the lock
body and fix with the appropriately sized cylinder
screw provided. (Figure 3.)
—
* If you are installing a cylinder with thumb turn, please skip this
step and proceed to step 4.
** If required, refer to suppliers instructions.
3. Install Euro Cylinder (key / key only*)
Figure 5.
Figure 4.
4.1.
If required, shorten cut-off screws to suit door
thickness. (Figure 4.)
4. Prepare Cut-off Screws
— if using face fix timber screws, proceed to step 5
4.2.
Ensure to cut so that the screw does not protrude
from the opposite rose once installed. (Figure 5.)
(5)
(1)
