3. Fasten the textile beits as backside of the rocker (fig 3)
4. Interlock the backside base frame to the two button base frame(fig 4)
5. The rocker is ready to use. By simultaneously pressing the buttons (fig 5) of the ad
-
just mechanism of the backrest, put it in the chosen position.
ATTENTION
: There are five positions of backrest. When the four plastic heels in the
bottom is folded, the rocker is ready to waving. Stop rocker waving by put the four
plastic heels at the far end of the main tube.
6. To install the toy bar and press the attaching clips to the metal body pipes until
“click” sound is heard (fig 6).
DEMONTAGE
1. Remove the rear frame tube from the undercarriage (fig 7).
2. Remove the two lower frame tubes from the rest of the bouncer by pressing the
small button. (fig 8).
Fig. 3
Fig. 5
Fig. 7
Fig. 4
Fig. 6
Fig. 8
