Bang & Olufsen Celestial BOC100 Series Скачать руководство пользователя страница 12

Страница: 12 / 18

The midrange and tweeter can be pivoted to direct the sound towards the listen-

ing area. Or for a more diffused surround sound experience, the rear speakers can

be aimed towards the wall. To aim the tweeter, gently apply pressure to the rim

with your thumbs to pivot the tweeter. To aim the midrange, gently apply pressure

to the rim and pivot it in the desired direction. Subject to which speaker is being

used, there are two switches: one to adjust the treble, and one to adjust the bass.

Depending on the area the speaker will be installed, bass and treble are affected

by its surroundings. When the room has a lot of hard surfaces bass & treble are

bounced and reflected through the room, and if the room has softer surfaces the

bass & treble are absorbed. Adjust for the desired acoustic balance for each room.

6. Testing & Adjustments

Fit the grille over the speaker. The grille uses magnets to be held in place.

7. Installing the Grille

Aimable

D109 install

SCALE:1:2

Origin Acoustics

6975 S Decatur Blvd

Suite 140

Las Vegas, NV 89118

844-ORIGIN1 (674-4461)

www.originacoustics.com

A C O U S T I C S

O R I G I N

Содержание Celestial BOC100 Series



















Результаты поиска

Содержание Celestial BOC100 Series

Отзывы:

Бренды по названию

Популярные бренды

Bang & Olufsen Celestial BOC100 Series, Руководство по установке

Результаты поиска

Содержание Celestial BOC100 Series

Отзывы:

Бренды по названию

Популярные бренды