17
Main room system and link room system
• To be able to start a DVD or CDV player
connected to your main video system, press
DVD on Beo4, then GO. Now operate your DVD
or CDV player as usual.
*Note: In order to display
PHONO
,
A.TAPE2
,
V.TAPE2
and
AV
on Beo4, you must add the
functions to the Beo4 list of functions, please
refer to Beo4’s own User’s guide and the chapter,
Customising your Beo4
, for further information.
Link room system
Main room system
• If your main Bang & Olufsen system is in
standby when you switch it on via your TV, you
will only get sound and pictures on your TV –
neither the speakers, nor the TV screen in your
main system will be cut in.
• If you try to switch on a source in your main
Bang & Olufsen system, and you get the
pictures and/or the sound from a different
source on your TV, it may be because a
recording (audio or video) is progressing in your
main system.
• When you watch a video source from your main
system, for example a satellite programme, you
will get pictures and
mono sound
on your MX
4002 TV.
To obtain pictures and
stereo sound
(if any is
available), you must use the
AV
* LIST button:
press, for example, SAT, LIST until
AV
* appears,
then SAT. (To obtain the
stereo sound
alone,
just press LIST until
AV
* appears, then SAT, you
must do it from standby, though).
• To start playback on a Bang & Olufsen record
player in your main system, press LIST until
PHONO
* is displayed, then GO. Pressing
▲
or
▼
while you are listening to a record makes the
record player step through the music in 8 mm
steps.
• To start playback on a secondary Bang &
Olufsen audio- or video tape recorder in your
main system, press LIST until either
A.TAPE2
* or
V.TAPE2*
are displayed, then GO.