Bang & Olufsen BeoVision 8, Справочник

Страница: 22 / 40

22
Connect a computer
Connect additional equipment
This chapter describes how to connect
additional equipment to the television.
You can connect a computer and use
your television as a monitor.
A decoder can be connected to the
television via one of the 21-pin AV
sockets.
A set-top box can be connected to
any of the AV sockets.
Make sure that all connected equipment
is registered in the CONNECTIONS
menu. For further information, refer
to the chapter
‘Register additional
video equipment’ on page 26.
Disconnect the television, the computer, and
all equipment connected to the computer
from the mains.
Using the appropriate type of cable, connect
one end to the VGA output socket on your
computer, and the other end to the VGA
socket on the television.
To hear sound from the computer in the tele-
vision speakers, use the appropriate cable and
connect the sound output on the computer
to the R – L sockets on the television.
Reconnect the television, the computer, and
all equipment connected to the computer to
the mains.
IMPORTANT! If you wish to connect a computer to
the television and use the television as a monitor,
make sure that the television, the computer, and
all equipment connected to the computer are all
disconnected from the mains before you connect
the computer and the television to each other.
In addition, the computer must be connected to a
grounded wall outlet as specified in the computer’s
setting-up instructions.
AV3 VGA L R
BeoVision