12
Set up your television
Set the maximum angle the TV will turn on
the motorised floor stand or wall bracket.
The wall bracket without a motor can
manually be turned 90˚ left or right
depending on your setup. Remember to
leave enough space around the TV to allow
it to turn freely. For more information,
The TV has several placement options. Refer
to
for available
stands and wall brackets or contact your
Bang & Olufsen retailer. Due to the weight
of the TV, any moving or lifting of the TV
should be performed by qualified personnel
– using the proper equipment.
Placement options
The television has several
placement options. Guidelines for
placement and connection must
be followed.
To ensure proper ventilation, allow
enough space around the screen. At
over heating (flashing standby indicator
and an on-screen warning), switch the
TV to standby, not disconnected from
the mains, in order for the TV to cool
down. You cannot operate the TV during
this time.
If the front screen glass should crack or
chip, or if it should be damaged in any
way, it must be replaced immediately, as
it could otherwise cause injury. You can
order replacement front screen glass
from your Bang & Olufsen retailer.
Wall bracket and stands
Handling
We recommend that you place the TV in the
packaging while you fasten the wall bracket
or the bracket for the stand to the back of
the TV.
