Bang & Olufsen BEOVISION 10-32, Начало работы

Страница: 18 / 24

First-time setup of your television
Connections
TV positions
Select the type of equipment connected to each socket, the sockets used,
the product name, and the source name.
Position 1 is the far left position and Position 9 is the far right. Position 5 is
the centre position.
Information
This first-time setup procedure is activated when the TV is connected to the mains
and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.
Switch on the TV
Wait for the TV to start up.
Switch on
1
*NOTE! When you have selected the preferred
settings in a menu, you may have to press the
green button to continue to the next menu in the
first-time setup procedure. Follow the on-screen
instructions.
Select settings
You are led through the first-time setup sequence
when you switch on the TV for the first time.*
1
Some menus may not appear depending on your
setup.
Select setting Accept and go to next menu item
Set the on-screen menu language
Make standby settings for the TV
Register connected equipment
or
This Getting Started describes operation with Beo4 in MODE 1 and the BEO4 SETTING menu set to
NAVIGATION BUTTON, see also page 9.
Please remember to set your Beo4 with navigation button to the MODE corresponding to the setting
you make in the BEO4 SETTING menu, see the Beo4 Guide for further information.
TV
MENU LANGUAGE
STANDBY SETTINGS
CONNECTIONS
18