Bang & Olufsen BeoSystem 1, Руководство пользователя, Страница: 45 / 56

45
Socket panels
The socket panel on BeoSystem 1
allows you to connect signal input
cables as well as a variety of extra
equipment, such as a DVD player or a
linked Bang & Olufsen audio system.
The V.TAPE, AV and DECODER
sockets are available for connection
of extra equipment.
Any equipment you connect to these
sockets must be registered in the
Connections menu. For further
information, refer to the chapter
‘ Register and use additional video
equipment’ on page 32.
AV and aerial socket panel
V.TAPE
21-pin socket for the connection of a BeoCord
V 8000 video tape recorder.
AV
21-pin socket for the AV connection of other
equipment, such as a DVD player, set-top box
or a second decoder (do not connect
baseband decoders here).
DECODER
21-pin socket for the connection of a
secondary set-top box or a primary decoder.
The socket provides the opportunity to
connect either an AV decoder or an RF
decoder.
The socket may be used for an AV 2 Expander
instead, which gives the opportunity to
connect a decoder or other non-Bang &
Olufsen auxiliary video equipment at the
same time.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen audio system.
The socket is also used for BeoLink
distribution of sound throughout the house.
LINK
Aerial output socket for distribution of video
signals to other rooms.
VHF/UHF
Aerial input socket from your external aerial
or cable TV network.
ATTN. ON/OFF
Aerial signal attenuator. Options are:
OFF: Normal setting
ON: Signals damped
IR OUTPUT
For connection of a set-top box.
DECODER
MASTER LINK
AV V.TAPE
IR-OUT
VHF/UHF
LINK
75
Ω
ATTN.
OFF ON