Bang & Olufsen BEOSOUND 9000, Справочник

Страница: 37 / 40

37
Using your PIN-code
When a PIN-code has been programmed, and
the BeoSound 9000 has been disconnected
from the mains for more than 30 minutes,
you must enter the PIN-code when the
BeoSound 9000 is turned back on.
Did you forget your PIN-code?
Should you forget your PIN-code you can
require a fi ve-digit Master Code from your
Bang & Olufsen retailer.
Enter the PIN-code
Press to select a digit
Press to accept the digit
When the PIN-code has
been entered the
display returns to the
relevant source display
e.g. RADIO 1
If an incorrect PIN-code is entered the display will
show ERROR and you may try again. After the
fi fth try, the BeoSound 9000 is turned off, and
must be left in stand-by mode for 3 hours, before
you can try again.
When you have received a Master Code…
When the display is
open for PIN-code
input…
Press the button for
more than 3 seconds to
change the display to fi t
5 digits
Enter the Master Code
Press to select a digit
Press to accept the digit
The display shows that
the PIN-code lock is off
When the Master Code is entered, the
BeoSound 9000 can be used without entering the
code again.
PIN _ _ _ _
m
p
OK
R ADIO 1
PIN _ _ _ _
p
PIN _ _ _ _ _
PIN _ _ _ _ _
m
p
OK
DELETED