Bang & Olufsen BeoSound 3, Руководство пользователя

Страница: 13 / 20

Connect headphones
You can connect headphones to the socket on the bottom of the system.
When headphones are connected, the speaker is muted.
Charge the battery
To charge the system, connect it to the mains as shown. The standby
indicator in the display blinks slowly during charging. Refer to page 4 for
further information about the standby indicator.
– It takes two and a half hours to fully charge the battery during standby,
and up to ten hours to charge it during use.
– A single charge provides approximately 10 hours of use.
– Standby time per charge is approximately 20 days.
– To ensure the best possible battery capacity, we recommend that you
charge your system on a regular basis.
Cleaning
Wipe dust off the surfaces using a dry, soft cloth. Remove grease stains
or persistent dirt with a soft, lint-free, firmly wrung cloth, dipped in a
solution of water containing only a few drops of mild detergent, such as
washing-up liquid.
Never use alcohol or other solvents to clean any part
of the system!
The front may be also cleaned with a soft brush mounted on a vacuum
cleaner set to the lowest level.
13
DC