Bang & Olufsen BEOLINK VIDEO, Руководство пользователя

Страница: 39 / 53

MASTER LINK
Do you experience any of the following with the Master Link system: The
video jams (red bar on the shield), humming in the front loudspeakers,
clicking in the rear loudspeakers when they are not in use, humming in all
loudspeakers, or no communication between AV products?
If this is the case you should check whether the aerial is grounded. If not,
we recommend creating a ground connection from here.
Simple Master Link measurements can be made either using a voltmeter or,
preferably, an oscilloscope.
All specifi cations are measured to ground using an oscilloscope.
The following specifi cations apply to Master Link:
Pin no. in Cable colour Function Specifi cation
Master Link
plug
1 white/green data - -0.25 V ± 0.1 V
2 green data+ +0.25 V ± 0.1 V
3 white/blue ML sensor
4 - 10 No connection (N.C.)
11 blue - supply- -7 V to -15V
voltage Stndby -3V to -15V
12 pink +supply- +7 V to +15 V
voltage 3V to +15V
13 white/orange sound -L 1 V Bal
Rin 2.2 Mohm,
Rout 75 ohm
14 orange sound +L 1 V Bal
Rin 2.2 Mohm,
Rout 75 ohm
15 white/red audio -R 1 V Bal
Rin 2.2 Mohm,
Rout 75 ohm
16 red audio +R 1 V Bal
Rin 2.2 Mohm,
Rout 75 ohm
Shield 3 x solid cable Ground
Data speed is 19,200 bits/sec.
By way of comparison, the Master Control Link data speed is 160 bits/sec.
Master Link
Aerial
35